Cookies on our website
Our website uses cookies to ensure that we give you the best user experience.
By continuing to browse our website, you are agreeing to the use of cookies.

More Information

Universal testing machines from 1 kN to 250 kN

These universal testing machines are specifically designed for demanding testing situations and are suitable for applications from all fields, whether for quality control or for research projects. Zwick universal testing machines are developed, produced and assembled exclusively in Germany. All universal testing machines can be modified as required to suit individual requirements.

Машини за изпитване от 5 kN до 250 KN


Новата серия изпитващи машини Alround-Line

Новата Allround-Line е подходяща за приложения от всички сфери. Доказано и утвърдено ел. управление в комбинация с гъвкава, модулна рамка гарантира оптимално решение за претенциозни приложения. Машината е идеално подходяща за качествен контрол и за научни проекти.



ProLine universal testing machines for standardized tests

The two-column ProLine universal testing machines are specifically designed for function-testing components and for routine materials testing. They feature precision guidance and a low-wear ball-screw, allowing trouble-free tensile and compression testing.



cLine - first choice for testing automotive seats

cLine materials testing machines are especially suitable for component testing and for testing flexible foam materials. Component testing mainly takes place on flexible foam products such as mattresses and vehicle seats and upholstery.



Електромеханични сервоцилиндри

Електромеханичните сервоцилиндри се използват универсално, пригодени са за приложение при изпитването на опън и изпитването на натиск и могат да бъдат интегрирани по различен начин в устройства за изпитване.


Single-screw testing machine 

Single-screw testing machines

Single-screw testing machines are used primarily for tests which impose particularly severe demands on load-frame stiffness.



Машини за изпитване на пълзене

Машините за изпитване на пълзене от серията Kappa се отличават с най-висока прецизност, многостранна използваемост и поради това с висока ефективност на разходите.



Strength is a defined mechanical material characteristic which characterizes the resistance of the material to deformation, whether elastic or plastic. It is the stress calculated from the maximum force attained for a defined strain or a defined flow-property with reference to to the original (non-deformed and non-loaded) cross-section of the material.

Strengths are differentiated according to whether the loading is uniaxial or multiaxial, then whether a static or dynamic load is applied to the component; a certain amount of elastic strain or plastic deformation of the specimen can be predefined or may be involved.

If strains are measured on a component according to forces applied in different ways, graphs will be obtained from which the technically relevant strength characteristic values can be determined and stress-strain diagrams produced. Tensile hardening curves from a single-axis tensile test are regarded as particularly important in this context. Different strengths can be achieved depending on the type of material and the condition of the material, together with the temperature, load and loading rate.

Distinctions are made:

  • according to the type of load applied: static and dynamic loading, for example static, increasing, fatigue life or fatigue limit, in contrast to continuous loading: fatigue strength; fatigue strength
  • according to the mechanical loading, including tensile strength, compression strength, flexure strength, torsional strength, bulk strength and shear strength.


Марвел ООД
Tel.  +359 32 678 026


Регистрирайте се за нашия информационен бюлетин

Свържете се сега

Форма за контакт